Skip to content

What You Have Always Wanted To Know About Woodworking

If you have hesitated to try working with wood because it seems hard, you need to think again. Anybody armed with sufficient know-how can do woodworking. All you need is some knowledge, patience and practice. This article gives you what you need to begin woodworking now.

Gel stains are great for staining furniture pieces. Stains that are liquid will run when you apply them and the gel stains are going to stick to your wood better. Additionally, because gel stains are thicker the pigment remains consistent throughout the application allowing for more even staining on horizontal and vertical pieces.

Determine the best wood for your project. In woodworking, different types of wood handle have different levels of stress tolerance. If you don't know how each wood type is going to handle what you're trying to do, take a bit of time to learn about each first.

You need a good stair gauge in your shop. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter's square. You can then use your square as a guide for a circular saw. This will help you with making straight cuts each and every time.

All woodworking shops should have stair gauges. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter's square. This will transform your carpenter's square from a straight-line tool, into a straight guide for your saw. The square will get you wonderfully straight cuts all the time.

Know all about the wood you are getting prior to purchasing it, especially if you plan to stain it. You'll want to look for paint-grade or stain-grade woods, depending on your desires for the project. Veneer and particleboard are different too. Veneer doesn't absorb stain and particleboard absorbs more. Using the proper wood makes sure that your project ends up the way you'd like it to.

Always be sure you're buying the right nail in the right size for the job you're working on. Very large nails can cause the wood to split, which will prevent it from holding well. But using a nail which is not big enough may not penetrate the wood properly and will not hold the pieces together. You have to figure out what the right size is for the job you are doing.

When woodworking, things can fly in your eyes unexpectedly. So don't think that you shouldn't wear goggles or else you may end up injuring your eyes for good. If the goggles you have do not fit well and provide clear sight, purchase a pair that do.

Always keep your eyes open for furniture that someone is getting rid of. Many times you can spot decent wood furniture at reduced prices or even free. Consider any and all pieces. You may be able to salvage the drawers of an unusable dresser and re-purpose them as bookshelves.

Pay attention to see if anyone you know is putting their house on the market. Even if you don't sell items, you can still make money from woodworking. It can increase your home's value. Projects can be as small as crafting a new mailbox and post to as large as installing new kitchen cabinets.

Wet surfaces before you sand them. Water raises the grain on the surface of the wood. Therefore, this will get rid of any scratches that may be on the surface. This gives a professional appearance to all finished woodworking projects. In addition, this can save unnecessary work in the future.

You should always do some practice runs when using a new technique or using a new tool. Find some scrap wood and practice before beginning a new project. If it doesn't work, try another piece, again and again until you get a handle on how it works.

You have to be patient. Your project will not be completed overnight. Understand that the finished piece exists in the wood, but you have to release it. Patience will allow you to focus. Your piece will be done soon!

Keep in mind that you need certain tools prior to starting any woodworking project. These tools are a power sander, circular saw, table saw, jigsaw and a drill. Orbital sanders are the best, but a power sander works, as well.

It does not matter if you have been woodworking for years or if you have never cut a piece of wood, the tips above should be helpful to everyone. As you go over and utilize what you've learned here, you'll be more likely to create a masterpiece. The research you do will help you improve your skills.

Format StatusPublished on